Skyjacker FAA303 - Manual (Page 4)

21. Remove the OEM brake line retaining brackets from each OEM upper
A-arm using a 5/32” drill bit to remove the rivet head. (See Photo
# 12)
22. Measure from the rearward eyelet of each new Skyjacker upper
A-arm 2 3/8” & 10 5/8". Mark, center punch, & drill each new brake
line retaining bracket mounting location using a 5/32” drill bit. (See
Photo # 13) Note: The OEM brake line retaining brackets are not in
line with one another. Be sure to note the orientation of the OEM
brake line retaining brackets before drilling.
23. Install the OEM brake line retaining brackets to each new Skyjacker
upper A-arm using the supplied 5/32” rivets & rivet gun. (See Photo
# 13)
24. Install the new Skyjacker upper A-arms using the OEM hardware & a
15mm socket. (See Photo # 14)
25. Attach each OEM lower front shock eyelet to each new Skyjacker
upper A-arm using the OEM hardware & a 15mm socket. (See Photo
# 15)
I-FAA303 Pg 4
Photo # 12
Photo # 13
2 3/8"
10 5/8"
Photo # 14
Photo # 15