SPYPOINT C6 User Manual - Manual (Page 11)

11
Here are the different moon phases that can be printed on photos.
(BF-6, BF-8, HD-7, 2N1, M8, C6)
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
DELAY
Allows the user to choose the time interval between each detection before
the camera records the next photo or video.
Additional setting: It is possible to decrease the delay between detections
to 10 seconds (instead of 1 minute) by using the following procedure. Note
that the battery life will be affected.
1. Turn OFF the camera.
2. Press and hold the UP button, turn the camera on. "10_S" appears on
the screen meaning the 1 minute delay has been replaced by a 10 second
delay.
3. To reset the camera to 1 minute delay, follow the same procedure. "1_M"
appears on the screen (see figure below).
MULTI-SHOT
Takes up to 4 consecutive shots at each detection, with a 10 second delay
between each photo. For the cameras with a Flash unit, the delay between
each photo will be 15 seconds. This option allows the user to get up 4 photos
from different angles when the camera is in PHOTO mode.
VIDEO LENGTH
Allows the user to select the duration of the recording when the camera is
set in VIDEO mode.
VIEW
Allows the user to view or delete recorded photos and videos directly on a
television.
1. Turn OFF the camera.
2. Set the switch MODE to VIEW.
3. Connect the yellow end of the RCA cable (supplied) into the VIDEO IN of
the TV and the other end into the TV OUT of the camera.
4. Turn ON the camera and the last recorded photo or video will appear. To
change the photo or the video, use the UP or DOWN button.
Here are the options available by pressing MENU/OK:
View Date/Time: Allows the user to view the date and time printed on
the photo.
Protect:
Allows the user to protect a photo or video to prevent it
from being deleted by selecting "Erase All".
Erase one:
Allows the user to erase the photo or the video seen on
the screen from the memory card.
Erase all:
Allows the user to erase all stored photos and videos,
with the exception of protected photos and videos from
the memory card.
Format:
Allows the user to erase the entire contents of the
memory card, including the protected files.
Language: Allows the user to change the display language.
Exit:
Allows the user to exit the menu to return to the
viewing screen.
Settings
10_5
10 s delay 1 min delay
2
3
4
RCA