Settings – SPYPOINT BF-10HD User Manual User Manual
Page 12
12
Settings
Time lapse:
(Off/30s/1m/3m/5m/15m/30m/1h)
Allows the camera to take photos at regular preset intervals. For example,
if the option "5m" is selected in the TIME LAPSE mode, the camera takes a
photo every 5 minutes during the period of operation (start time and stop
time) even if there is no detection. This option allows the user to obtain
photos of subjects outside the detection range of the camera.
Note: The TIME LAPSE mode only applies in PHOTO mode, not in VIDEO
mode. When TIME LAPSE mode is selected, the DELAY option and the
MULTI-SHOT mode are disabled. The photo resolution remains the same
except for the low resolution which is reduced to 800 x 600.
Remote control (RC-1):
(BF-12
HD
)
(On/Off)
Allows the user to use the RC-1 remote control which works with the RE-
MOS
TM
wireless technology, sold separately (p.19). The remote control
allows to activate/deactivate the detection of the camera and to remotely
take a photo/video in an area of 500 ft.
Wireless sensor (MS-1):
(BF-12
HD
)
(Off/1/2/3/4/5/6/7)
Allows the camera to be triggered wirelessly by one or more MS-1 devices
through the REMOS
TM
wireless technology, sold separately (p.20).
IR-Booster:
(BF-12
HD
)
(On/Off)
Allows the camera to trigger, up to a distance of 50ft, one or more
IR-BOOSTER infrared lighting devices without the use of an additional
transmitter through the REMOS
TM
wireless technology. Sold separately
VIEW
Allows the user to view or delete recorded photos and videos on the
camera screen or on a TV.
• Viewing with the screen of the camera:
When the VIEW mode is selected, the latest photo or video recorded
appears on the screen automatically. Press ► or
◄
to view next or previous
images. Press ▲ and ▼ to zoom in and out. When the zoom is activated,
press OK to move the image by using ◄, ►, ▲ or ▼. Press OK again then
▼ to return to normal view.
Press OK to view the different options available.
Play:
Allows the user to play or pause the video on the screen.
(This option is available only for videos)
Date and time:
Allows the user to view the date and time printed on
the photo.
Protect:
Allows the user to protect a photo or video to prevent it
from being deleted by selecting "Delete All".
Delete:
Allows the user to erase from the memory card, the
photo or the video seen on the screen.
Delete all:
Allows the user to erase from the memory card all stored
photos and videos, with the exception of protected files.
Format:
Allows the user to format memory card and delete all
protected photos and videos.
Exit:
Allows the user to exit the menu to return to the viewing
screen.
Note: The number of yellow stars that appear to the right of the screen
corresponds to the resolution of the photos.
=Low resolution =Medium resolution =High resolution