SPYPOINT IR-8 - Manual (Page 13)

24 25
FEATURES
• Still photos 8 MP
• Video resolution 640 x 480
• Photo file JPG
• Video file AVI
• External memory SD/SDHC card up to 32 GB
• Exposure Automatic
• Viewing mode 2.4" viewing screen / Computer
/ TV
• Video output PAL / NTSC
• PIR distance Adjustable from 5 to 50 feet.
• Motion detection angle 30°
• Power source
6 AA-cell batteries or
External 12 volts DC power jack
or Lithium rechargeable battery
pack
• Operating temperature (-20 °C to +50 °C)
(-4 °F to +122 °F)
• Storage temperature (-30 °C to +75 °C)
(-22 °F to + 167 °F)
• Computer operating
system
WIN 2000 / XP / VISTA / WIN 7
/ Mac OS X
KIT INCLUDES
• SPYPOINT IR-8 camera
• Mounting Kit
• USB Cable
• Video Cable
• User’s manual
English
MAIN FEATURES
• TFT 2.4" viewing screen.
• Adjustable PIR sensitivity.
• Color pictures during day; black and white at night.
• Multi shot pictures (up to 6 per detection).
• Video length adjustable from 10 to 90 seconds.
• Adjustable delay between motions from 1 to 30 minutes.
• Night-time photos and videos taken with 46 LED.
• Internal camera removable for easier handling.
• Water-resistant housing case.
• Select or cancel imprinting date, time, temperature and
moon phases on photos.
• Auxiliary power jack for external 12 volts DC input.
• Optional use of a solar panel SP-12V to maintain the
charge of the lithium battery pack LIT-C-8. (optional)
POWER
This camera offers the possibility to use a rechargeable lithium
battery whose charge can be maintained using the solar panel
SP-12V (optional). During installation of rechargeable lithium
battery, slide up the switch inside the battery case up to activate
the charging system with the solar panel. For all other uses,
slide the switch down.
Alkaline batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is
insufficient to power your SPYPOiNt camera. Insert the
batteries as indicated inside the battery case. Exact polarity
must be followed. The battery level is shown in the bottom
right corner of the screen when the camera is in « TEST »
mode. When a single line remains, the camera continues to take
pictures but we strongly recommend changing the batteries
before they are empty. (See figure below)
English