SPYPOINT SDB-85 - Manual (Page 4)

6 7
English
English
FEATURES
• Maximum power 25 watts
• Noise level 85 decibels
• External memory SD/SDHC card up to 32 GB
• Detection range From 5 to 50 feet
• Angle of motion sensor 30°
• Power source 12 AA-cell batteries or
External 12 volts DC power jack or
2 lithium rechargeable battery packs
• Connection -1/8" mono audio output jack
-1/8" mono input jack for external
triggering
• Operating temperature (-20 °C to +50 °C)
(-4 °F to +122 °F)
• Storage temperature (-30 °C to +75 °C)
(-22 °F to + 167 °F)
KIT INCLUDES
• SPYPOINT SDB-85 audio repeller
• Strap
• User’s
manual
MAIN FEATURES
• LCD display screen.
• Compatible with SPYPOINT WRL-B motion detectors for
external wireless triggering
• One default alert sound included (siren)
• Supports standard MP3 audio files (192 Kbps and less)
• External speaker or headphones output jack
• External trigger jack
• Water-resistant housing case
• Power jack for external 12 volts DC input
POWER
The battery level is shown in the top right corner of the screen.
When a single line remains, the device will keep working but we
strongly recommend changing the batteries before they are empty.
(See figure below)
Alkaline batteries
This device requires the use of 12 AA batteries (1.5V). The use
of alkaline batteries is strongly recommended. Insert the batteries
in the battery case and then inside the device as indicated (see figure
below). Exact polarity must be followed. We also recommend
the use of new batteries to ensure maximum performance of
your device.
Lithium battery pack
The SPYPOINT SDB-85 can be powered by 2 rechargeable lithium
batteries LIT-C-8 (sold separately, refer to the section “OPTIONS”).
This type of battery is less affected by cold temperatures and
lasts up to 3 times more than alkaline battery. Insert the batteries
in the battery case and then inside the device as indicated
(see figure below).
Lithium battery on top Lithium battery below
Top
6 x AA batteries on top 6 x AA batteries below
Top