SPYPOINT SC-Z9 User Manual
Page 23
26
MEMORY CARD
Using a Micro-SD memory card is required to operate the
camera SPYPOINT SC-Z9. To insert the card, unscrew the
4 screws located behind the camera (same manner as for the
batteries). The Micro-SD card slot is located at the bottom of
the camera (see figure below).
The camera can accept memory cards up to 8 GB. Before
inserting or removing the memory card, the camera must be
turned "OFF". Failing to do so may cause the loss of videos or
damages to the memory card. When the memory card is full,
the LCD panel indicates "FULL". The following chart shows
approximate time available for recording videos depending on
the memory card capacity.
Note: The use of a class 6 or higher memory card is
recommended. A class 2 or 4 memory card may not support a
data transfer rate high enough to record video from the SC-Z9
camera.
English
Class 6