Stack-On IWC-11 - Manual

R
40114-1204
1 15
FOAM X
(FOR FLOOR
OF CABINET)
FOAM C
FOAM B
FOAM A
TRAY C
SHELF B
SHELF A
SHEETMETAL SCREW
STACK-ON
NAME PLATE
WASHER
LAG SCREW
PARTS INCLUDED:
Shown below are illustrations of the parts included in the kit for your In-Wall Cabinet. Refer to Tables 1 and 2 for the exact quantities that you should
have.
Drywall Saw
Drill with
3/16" bit Phillips screwdriver
TOOLS REQUIRED:
NOTE:
Assemble shelving after mounting the cabinet to a wall. Review these instructions prior to installation.
SELECTING A LOCATION:
For best results install your safe in an isolated, dry and secure area.
Serial #: Key #:
IMPORTANT:
Record the serial and key numbers from the inside
the front door of the cabinet. You will need the serial
number information in order to replace lost keys.
Do not store this document in your security cabinet.
Keep keys in a secure place away from children.
Home Security Cabinet
Installation Instructions
Models IWC-11, IWC-22
& IWC-55
NOTE: You can store your Key # and your Serial # information on Stack-On’s
SECURE web site – www.stack-on.com under Service.
Storing your Key # will provide instant access to this important information, should
you ever lose your keys or need the number to order a new set.
Only you will have access to this information.