Stainless Works Chevy/GMC Truck 2007+ Exhaust: 6.2L - Manual (Page 2)

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
7. Install (2) Accuseal clamps and mufflers.
8. Install (2) Accuseal clamps and the (2) saddle clamps with hanger onto the front
tailpipes
9. Install front tailpipes and rotate into position.
10. Install (2) Accuseal clamps and the (2) saddle clamp with hanger onto the rear
tailpipes
11. Install rear tailpipes and rotate into position.
12. Install (2) Accuseal clamps and tips rotating into position.
13. Tighten all clamps after adjusting for proper fit.
14. Reconnect battery.
15. Be sure to have adequate clearance around all wires, hoses and lines. If anything
is in contact with the exhaust system, it will melt. Make sure to have at least
½” of clearance and wrap any suspect areas with DEI thermal barrier wrap.
16. After double checking for clearance and making sure all lines, wires and hoses are
secured, drive the car for 10-20 miles and re-check all clamps and clearances.