Stainless Works Dodge Challenger 2008-12 SideBurners Modular-Exhaust User Manual

Page 2

Advertising
background image

WWW.STAINLESSWORKS.NET

800-878-3635

FAX: 440-543-9183


















6. Install the hanger bolts in the rocker panel (see photo below).















7. The two formed half-tubes at the inlet ends of the Sideburners are formed to fit

the smaller 2-1/2” dia. RT exhaust. When installing on an RT, use the provided
2-1/2” dia. clamps to connect to the RT exhaust. When installing on an SRT8,
use the provided 2-3/4” dia. clamps to connect to the SRT8 exhaust.


8. At this time, place two of the correct size clamps on each of the factory pipes

adjacent to the new hole locations.

Advertising