Stainless Works Ford F-150 2011-2014 5.0L Exhausts User Manual
Page 4
WWW.STAINLESSWORKS.NET
800-878-3635
FAX: 440-543-9183
ALL CATBACKS
15. Adjust and tighten system and hangers (For under bumper systems, also retighten
spring shackle bolts.)
16. Be sure to have adequate clearance around all wires, hoses and lines. If anything is
in contact with the exhaust system, it will melt. Make sure to have at least ½” of
clearance and wrap any suspect areas with DEI thermal barrier wrap.
17. Lower vehicle and reconnect battery.
18. After double checking for clearance and making sure all lines, wires and hoses are
secured, drive the car for 10-20 miles and re-check all clamps and clearances. Your
system may be tack welded at the joints/ clamps to reduce shifting of the system
during heating and cooling cycles. Make certain to disconnect the battery before
performing any welding.