Stainless Works Ford F150 2010+ 5.4L-6.2L Catback - Manual (Page 2)

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
The next two steps are only required for installing the catback system to manifolds. If
installing the Catback to Stainless Works headers, skip to item #9 where the exhaust
will be connected to the Stainless Works X-Pipe.
7. Attached short 3” to 2.5” adapter to front of Y-pipe with 3” clamp.
8. Install Y-pipe using existing factory 2.5”clamp.
INSTALLING THE CATBACK FOR EITHER HEADERS OR TO MANIFOLDS
9. Install muffler lead pipes using (2) 3” clamps and hanger.
10. Install mufflers using (2) 3” clamps.
11. Install tails using (2) 3” clamps.
12. Install hangers to tails using U- bolt clamps.
13. Install tips using (2) 3” clamps.
14. Adjust all pipes for fitment and tighten clamps.