Stainless Works Jeep Grand Cherokee SRT8 2012-14 Exhausts - Manual (Page 3)

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
14. Adjust as needed and tighten from front to rear.
15. Be sure to have adequate clearance around all wires, hoses and lines. If
anything is in contact with the exhaust system, it will melt. Make sure to
have at least ½” of clearance and wrap any suspect areas with DEI thermal
barrier wrap.
16. After double checking for clearance and making sure all lines, wires and hoses
are secured, drive the car for 10-20 miles and re-check all clamps and
clearances. Your system may be tack welded at the joints/ clamps to reduce
shifting of the system during heating and cooling cycles. Make certain to
disconnect the battery before performing any welding.