Brother 8060P MFC-9060 - Manual (Page 161)

151
T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
1 Open the top cover.
2 Remove the drum unit assembly.
3 Wipe the electric terminals with isopropyl alcohol on a cotton swab.
4 Wipe the gears with a clean dry cloth.
5 Gently wipe the scanner window and the toner sensor with a clean
soft dry cloth. Do not use isopropyl alcohol to clean the scanner
window or the toner sensor.
Cleaning the Drum Unit
We recommend you place the drum unit on a drop cloth or large piece of
disposable paper to avoid spilling and scattering toner.
1 Turn the drum unit upside down carefully.
2 Clean the primary corona wire inside the drum unit by gently sliding
the tab from right to left several times.
3 Return the tab to the home position (▼ mark position) before
reinstalling the drum unit.
Home Position ( ▼ )
Tab Corona Wire
CAUTION
If you do not position the tab at the home position, printed pages may
have vertical stripes.
4 Install the drum unit into the machine.
See the section “Replacing the Drum Unit” in this chapter.
5 Close the top cover.
6 Plug in the power cord.
7 Connect the telephone line.