Steriflow Mark 90 Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
Mark 90 Series
Cavity-Filled Three Piece Ball Valves
The Mark 90 Series is a sanitary ball valve de-
signed with FDA-approved cavity filler seats and
Tri-clamp ends to minimize pockets where media
can collect. The inner diameters and end con-
nections are exactly the same size as the ID of
the ball/seat ensuring no obstruction of flow from
tubing through the valve.
F
eatures
In sizes from 1/2" (DN15) through 4" (DN100) •
with "tube ID design" to provide unobstructed
flow and better drainage
Pressure ratings up to 900 psi (62,5 bar)
•
Virgin Teflon cavity filler •
Internal finish to 25 Ra •
Lockable handle prevents accidental opening or •
closing of valve
ISO 5211 actuator mounting flange
•
Designed for simple maintenance with in-line •
repairable feature
Anti-blowout stem
•
Spring-loaded stem seal – no threads in packing •
chamber
No sharp internal fillet radius – for smooth finish
•
Tri-clamp or tube weld ends •
Available as manual or actuated (pneumatic/ •
electric) valve
I
ndustrIes and
a
pplIcatIons
The Mark 90 is designed for applications in
the following industries and applications:
Pharmaceutical •
Healthcare/Cosmetics •
Food & Beverage •
Specialty Chemical •
Low Pressure Clean Steam •
Purified Water •
SIP/CIP •
Process Gases (N •
2
, CO
2
)
Clean Air Systems •
Viscous Media •