Steriflow Mark 15 Series User Manual

Mark 15 series, Top mounted pneumatic valve positioners

Advertising
background image

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com

Mark 15 Series

Top Mounted Pneumatic Valve Positioners

The Mark 15 positioner uses the full force of its air

supply to drive and maintain a pneumatic actuator to

position a valve to what is required by control

instrument, regardless of the presence of forces that

change valve position.

This line of compact instruments incorporates a

single-axis, force-balance principle of operation to

ensure accurate and stable control valve position-

ing. In all cases, including bottom-loading applica-

tions, a MK15 is mounted directly on the topworks of

the valve, with no external levers or other exposed

mechanisms.

Each positioner receives a signal from a control

instrument, and using an air supply as high as 45

psig (3,4 bar), the positioner strokes the valve

actuator to the required position.

Like all valve positioners, the MK15 has feedback

circuits designed to measure the position of the

actuator’s piston or diaphragm. The positioner then

supplies or exhausts air to bring the actuator within

the required range for its corresponding control

instrument.

The position of the valve actuator is sensed by the

amount of compressive force exerted by a spring on

the valve positioner’s diaphragm assembly. By se-

lecting the appropriate spring from the wide

selection available almost any combination of valve

stroke (from 1/4” to 4”; 6,4mm to 102mm) and instru-

ment spans of 6,12, and 24 psi (0,4, 0,8 and 1,7 bar)

can be obtained.

F

eatures

Single-axis, force-balance principle of

operation, ensures accurate and stable

positioning

Feedback circuits direct the actuator’s

position, ensuring adherence to the

control instrument signal

Accommodates a wide variety of valve

strokes and instrument spans

Direct-mounted to top of pneumatic

actuator

Offers a smaller, more streamlined pack-

age with no external linkage

V

alv
e P
ositioners


Mark

1

5

T

op Mount

ed P/P

P

ositioners

Advertising