Buffalo Technology WHR3-G54 - Manual (Page 41)

41
PPPoE Setting (for enabling PPPoE Client function) - Allows administrator to use PPPoE as
specifi ed by the ISP.
The following parameters should be entered for PPPoE Settings:
Name of Connection - Enter the name of your connection.
User Name - Enter the user name (up to 64 alphanumeric characters) for PPPoE au tho ri za tion.
Password - Enter the password provided by your ISP (up to 64 alphanumeric characters). Reenter
the password in the Confi rmation box.
Service Name - Enter the PPPoE service name (up to 64 alphanumeric characters). If your ISP
doesn’t require a service name, then leave it blank.
Connection Type - Select from:
- Continuous Connection - connects im me di ate ly after setting and never
disconnects.
- Connect on Demand - Reconnects when the disconnect time elapses.
- Manual - Disables Automatic Con nec tion. Connects to the Internet using the connect button on
the initial settings page.
The Enter New Connection button will not appear until Use PPPoE Client is set.
Disconnection Time - Specify the number of minutes (0-1440) before automatic dis con nect is
performed. If “0” is entered, the dis con nect function is disabled. If Con tin u ous Connection is
selected, the timer is disabled.
Advanced Settings