Buffalo Technology WHR3-G54 - Manual (Page 48)

48
IP Address of DMZ - Allows administrator to set the DMZ (De-Militarized Zone) address. Incoming
packets containing no recognizable destination port information will be re di rect ed to the DMZ’s IP
address.
Display/Delete NAT Table - Allows ad min is tra tor to delete NAT tables.
Add NAT Table
Group - Specify a group (up to 16 characters)
that the NAT rule belongs. Groups are simply
used to visually organize the NAT table for the
administrator. It is recommended to name the
group after the protocol that is being setup
(e.g. Group Name FTP when setting up ad-
dress translation for FTP)
Click New Group to create new group or
select an existing group to add a NAT rule to it.
WAN Side IP Address - Select AirStation’s
WAN Side IP Address or Manual IP Ad-
dress. For Manual setting, enter the IP ad-
dress used by the WAN computer to connect to the local computer.
AirStation’s IP Address of WAN should be used unless you have multiple WAN side IP
addresses.
Advanced Settings
Address
Translation
Setup