Installation – Summit FFBF285SS User Manual
Page 6
Installation
Transporting your appliance
1. The appliance should only be transported in the upright position.
2. The packaging as supplied must remain intact during transportation.
3. If the unit has been transported or carried in the horizontal position, it may only
be plugged in after standing in the vertical position for 4 hours. Plugging in the
appliance any sooner may result in damage to the refrigerator-freezer and
affect your warranty.
Setting up the appliance
Do not operate your appliance in a room where the temperature is likely to fall
below 50
F at night and especially in winter. At lower temperatures the
appliance may not operate, resulting in a reduction in the storage life of the
food.
The climate class rating of your appliance is given on the rating label located
inside the appliance. It specifies the appropriate operating ambient
temperatures as shown below:
Climatic class
Ambient temperatures
SN
50.0
F to 89.6F
N
60.8
F to 89.6F
ST
64.4
F to 100.4F
T
64.4
F to 109.4F
SN-ST
50.0
F to 100.4F
SN-T
50.0
F to 109.4F
Location
The unit should be placed in a dry room which can be aired.
Avoid direct sunlight or direct heat sources such as a stove or radiator.
To make sure that sufficient room is provided around the appliance to ensure
free air circulation, allow at least 1” at the back and top, and ¾” at the sides.
Fit the two plastic wall spacers supplied with the appliance, to the condenser
at the back of the appliance, rotating 1/4 turn. See illustration below.
5