Summit FFBF285SS - Manual (Page 9)

20. Remove the plastic tap to the opposite side on the front bottom trim. (18)
21. Fit the front bottom trim to the bottom hinge and other feet. (19)
22. Rotate the top hinge 180
. Unscrew the hinge pin and re-tighten it to the
opposite side. (20)
23. Fit the top hinge and tighten the bolts. (21)
24. Fit the plastic cover on the front top trim. (22)
25. Locate the freezer door to the bottom hinge and attach to the cabinet. (23)
26. Locate the middle hinge on the freezer door (24) and put the fresh food door
between the top and middle hinge carefully. (25)
27. Fit the middle hinge. Adjust the doors and tighten the bolts. (26)
28. Carefully stand the appliance up (with someone’s help) and adjust the front
feet.
29. Remove the plastic plugs on the doors. Unscrew the door handles.
Reposition the door handles on the other side. Tighten the screws and fit the
plastic plugs. (27)
30. Put back all loose items and fittings.
31. Wait for at least 4 hours to allow the system to settle before switching on.
Before starting up the appliance
Before you begin operating your refrigerator-freezer, check the following points
for safety:
 Is the appliance standing firmly on the floor?
 Is there sufficient space for good air circulation?
 Is the interior clean? (See Cleaning and Care.)
 Set the thermostat knob halfway between 1 and 5, or Min and Max.
 Now connect the appliance to the power supply.
Operation
Setting the operating temperature
The operating temperature is regulated by the temperature control, or thermostat.
1 = Lowest cooling setting (warmest setting)
5 = Highest cooling setting (coldest setting), or
Min. = Lowest cooling setting (warmest setting)
Max. = Highest cooling setting (coldest setting)
8