Summit ACR1515SS - Manual (Page 6)

6
LOCATION OF PARTS
HANDLING & TRANSPORT
DO NOT MOVE UNIT WITH PRODUCT INSIDE as loose product can break, spill, damage the appliance,
etc.
Adjustable shelves (4)
Glass door
with stainless steel frame
Lighted header
Ventilation louvers
Leveling legs
Interior lighting
(around door)
Thermostat control
Light switch
Handle
Internal fan
Fig. 1
DO NOT TIP UNIT AT MORE THAN A 45°
ANGLE. DO NOT EXPOSE TO SUNLIGHT
OR STORE AT TEMPERATURES
HIGHER THAN 131°F (55°C). WHEN HANDLING STATIC CONDENSER
MODELS SUCH AS THIS, MAKE SURE
THAT DOOR PIVOT IS LOCATED AS
SHOWN IN FIGURE ABOVE.
Static condenser
(on back of unit)
Compressor and fan
(behind louvers)
Stainless steel interior