Summit CP97R-1 - Manual (Page 11)

CARE AND MAINTENANCE
Cleaning Your Appliance
1. Turn the temperature control to 0, unplug the appliance and remove the food,
shelves and trays.
2. Wash the inside with a solution of warm water and baking soda. The solution
should be about 2 tablespoons of baking soda to a quart of water.
3. Wash the shelves and trays with a mild detergent solution. Plastic parts
cannot be washed in a dishwasher.
4. The outside of the appliance should be cleaned with a solution of mild
detergent in warm water.
5. The condenser coils in the back of the unit should be vacuumed when they
are dusty or dirty.
6. Clean the drain pan on the refrigerator compressor. Do not remove the drain
pan.
7. After cleaning, reconnect the appliance to its power source and reload the
food packages.
Changing the Light Bulb
1. Unplug the AC power cord from the wall.
2. Squeeze the tabs at the top and bottom of the
light bulb cover simultaneously.
3. Remove the light bulb cover.
4. Unscrew the bulb.
5. Replace with a 10-watt bulb that is the same
shape and size.
6. Replace the light bulb cover.
Power Failure
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If the power will be off for a longer period of time, you need to take the
proper steps to protect your food.
Vacation Time
During long absences, remove all the food. Unplug your appliance, clean it and
leave the door open slightly to avoid formation of condensation, mold and odors.
10