Save these instructions – Summit CP97R-1 User Manual
Page 4
FOLLOW WARNING CALL-OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
This unit is not designed to operate in enclosed spaces. When placing
your unit, make sure you allow adequate airflow on all sides.
Use two or more people to move and install the refrigerator. Failure to do so
can result in back or other injury.
To ensure proper ventilation for your refrigerator, the front of the unit must be
completely unobstructed. Choose a well-ventilated area with temperatures
above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an
area protected from the elements such as wind, rain, water spray or drips.
The refrigerator should not be located next to ovens, grills or other sources of
high heat.
The refrigerator must be installed with all electrical, water and drain
connections in accordance with state and local codes. A standard electrical
supply (115-120V AC only, 60 Hz), properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of the refrigerator.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the refrigerator to be leveled in order to work properly. You
may need to make several adjustments to level it.
All installation must be in accordance with local plumbing code requirements.
Make certain that pipes are not pinched, kinked or damaged during
installations.
Check for leaks after connection.
Although the unit has been tested at the factory, due to long-term transit and
storage, the first batch of ice cubes must be discarded.
Do not use solvent-based cleaning agents or abrasives on the interior. These
cleaners may damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
CAUTION: THIS APPLIANCE IS NOT DESIGNED FOR THE STORAGE OF
MEDICINE OR OTHER MEDICAL PRODUCTS.
SAVE THESE INSTRUCTIONS
3