Summit SPW1103ADA - Manual (Page 4)

188635
•
BE SURE TO REMOVE SHIPPING RODS PRIOR
TO THE FIRST USE OF THE APPLIANCE.
ATTEMPTING TO OPERATE THE MACHINE
WITHOUT REMOVING THE SHIPPING RODS
MAY RESULT IN IRREPARABLE DAMAGE
WHICH IS NOT COVERED UNDER WARRANTY.
•
When connecting your washing machine to
the water supply, be sure to use the brand new
water inlet hose and appropriate sealing gaskets
(included).
•
Do not locate the machine in a room with
temperature below 0°C. Parts of the machine may
be damaged if frozen.
•
Install the washing machine in a perfectly
horizontal position, on solid flat concrete floor.
•
Follow the instructions for correct installation and
water and main connections.
•
Never immerse the end of the drain hose into the
draining water.
•
Prior to starting the wash cycle, ensure the door is
closed properly.
•
Door may not be open during the washing cycle.
•
Use only detergents and softeners for
machine wash. Manufacturer may not assume
responsibility for any damage and eventual
discoloring of gaskets and plastic components as
a consequence of incorrect use of bleach and/or
coloring agents.
•
High Efficiency (“HE”) detergent recommended.
•
For removal of lime residues use such agents
with added anti-corrosion agents. Follow the
manufacturer’s instructions. Finish the lime
removal by multiple rinsing to completely remove
eventual acid residues.
•
Never use detergents containing solvents, since
there is a danger of creating toxic gasses which
may damage the machine and result in ignition or
explosion.
•
Upon completion of washing operation close the
water faucet.
4
Cautions