Burner control knobs, Using the cooktop, Before using the cooktop for the first time – Bosch NGT User Manual

Page 9

Advertising
background image

English 5

WARNING:

To prevent flare-ups all grates must be properly posi-

tioned on the cooktop whenever the cooktop is in use. Each of the four
feet must be placed into the corresponding dimples in the cooktop. Do
not use a grate if the rubber feet are missing or damaged.

Burner Control Knobs

The standard burner controls have an infinite number of heat settings with no
fixed positions.

Figure 4 - Burner Control Knob

To operate: Select the appropriate control knob, push down and turn counter-
clockwise to the desired flame size. Turn OFF by turning the control knob clock-
wise to OFF.

A rubber grommet is located under each control knob.

To remove knob and grommet: With burner in the OFF position, gently lift knob
up and off. Gently pull grommet toward center and lift out.

WARNING:

To avoid electric shock, do not reach through opening

into rough-in box.

To replace grommet and knob: Replace grommet by placing center groove
around cooktop. The rubber grommet should be firmly attached around the cook-
top opening. Place the control knob indicator line at the OFF position; press down
firmly.

Using the Cooktop

Before Using the Cooktop
for the First Time

•

Remove all packing materials and literature from the cooktop surface.

•

While cool, wipe with a clean, damp sponge and dry.

•

There may be a slight odor during the first several uses; this is normal and will
disappear.

•

Optimum cooking results depend on the proper cookware being selected and
used. (See Proper Cookware.)

•

Read all safety precautions and Use and Care Manual information prior to
operating.

LO

HI

OFF

Advertising
This manual is related to the following products: