TaoTronics TT-BS009 - Manual (Page 35)

35
Wire Less Communication Setting
Unpair the scanner from host
Unpair the scanner from host
Pair Scanner with Host
Pairing is the process by which a scanner initiates communication with a
host. The scanner with the Host pairing as follows:
1. Connect the scanner to the Host with the Charging Cable.
2. Press the "Pairing Button” until the Scanner issued a "beep beep" sound.
NOTE: A host is able to work with as more as 99 scanners at the same
time.
Clear the Buffer of Scanner
Scan the setting bar code below will clear the bar code data save in the
scanner buffer.
Clear the Buffer of Scanner