Telematrix 3300 Series - Manual (Page 5)

Storing “Pause/Redial” Into Memory - Pause # 12
If you are using your telephone anywhere that requires an access code for outside calls,
you may need to add a “Pause” to the number to allow time for the outside line to
connect. You can enter an many pauses as needed.
Note: a “Pause” or “Flash” programmed into memory counts as one digit when storing
a number.
1. Lift the Handset.
2. Press the STORE Key - # 5.
3. Enter the required access code using the dial pad.
4. Press the “Pause” key.
5. Enter the digits to be stored using the numeric dial pad.
6. Press the desired memory location wherein the number is to be stored.
7. If additional numbers are to be stored, repeat steps 3 thru 7.
8. Hang up the Handset.
(Does not apply to non-memory key telephones)
“Flash” hook function - Flash # 6 & # 14
The Flash function is used to access PBX features or Telco line features such as Call
Waiting. The Flash function is a 600mS timed line break. If the Flash function will be
used often, store the feature into memory located for easy access as follows:
1. Lift the Handset then press the “Store” key.
2. Press the “Flash” Key - # 6 & # 14.
3. Press the memory location wherein the “Flash” is to be stored.
4. Hang up the Handset.
Programming Message Waiting 1-Touch Key
TouchLite (Message Waiting) Into Memory - TouchLite # 18
TouchLite is an innovation that integrates the visual message waiting lamp and a speed
dial key onto one. It allows easy access for guests to retrieve messages.
When the message waiting lamp lights notify the guest that a message is waiting, a
simple press of the Red TouchLite button connects the guest to the message center
or front desk.
TouchLite also adds an additional memory location to this telephone.
1. Lift the Handset.
2. Press the STORE Key - # 5.
3. Enter the number to be stored using the numeric dial pad.
4. Press the red TouchLite key to store.
5. Hang up the Handset.
(Does not apply to 3300LBY or 3300MWB telephones)
4