Telematrix 3300 Series User Manual
Page 6
5
S
ERVICE
When problems arise during installation or service that cannot be resolved using this or
related documents, contact your regional TeleMatrix PriorityCare Department.
Many times a problem can be resolved by contacting a TeleMatrix support agent.
Please contact TeleMatrix PRIOR to sending a telephone to our service center for repair.
In the unlikely event that a factory repair is necessary:
1. Include a brief description of the trouble that you are experiencing.
2. Include a proof of purchase for a repair warranty.
3. Send the telephone prepaid by UPS or Parcel Post insured to your regional office:
TeleMatrix will pay to return the repaired telephone to you.
Contact PriorityCare Department at: [email protected]
Visit our website for current faceplate worksheets and warranty
documents www.telematrix.net.
C
ARE AND MAINTENANCE
• Keep the telephone dry. If it gets wet, wipe it dry immediately.
Liquids might contain minerals that can corrode the electronic circuits.
• Use and store the telephone in a normal temperature environment.
Temperature extremes can shorten the life of electronic devices and distort or melt
parts.
• Keep the telephone away from excessive dust and dirt that can cause premature
wear of parts.
• Wipe the telephone with a damp cloth occasionally to keep it looking new.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
system.
3. Attach the Wall Mount Bracket on to the
back of the phone, placing mounting clips
into brackets slots - push in place until
you hear them snap into place. # 25.
4. Next, guide the phone with wall mount
wedge # 26 onto the studs of the wall
jack. Press down firmly until you feel
it snap into place. The unit is now wall
mounted.
Please contact PriorityCare to order Wall
Mounting Wedge and Short Line Cord:
Wall Mounting (optional)
The 3300 Series telephones is designed to
conveniently wall mount.
Please follow these easy steps:
1. The handset retaining clip must be
engaged to secure the handset when
hanging it up. To engage the clip, unsnap
the clip, rotate the clip 180 degrees and
then snap the clip into place. # 3
2. Plug one end of a short line cord into the
line jack on the back of the base unit # 8.
Plug the other end of the line cord into
the wall jack. # 27
Wall Mounting...
# 8
# 27
# 25
# 26
# 25
# 3