TerraWave TWSD16128PHC-UL User Manual
Page 6
10521 Gulfdale, San Antonio, TX 78216 I
www.terrawave.com
I Email:
I Phone: 210-375-8482
Version 1.1 - Page 6
(Figure 3)
Installing WLAN / Networking Components
The TWSD16128PHC-UL will accommodate WLAN / Networking products to be installed
inside the unit. This equipment should be installed on the mounting plate in the unit.
WARNING: Water or condensation may build up on the bottom of the enclosure. No
equipment or live parts should be installed or placed on the bottom surface of the enclosure.
Failure to do so could result in equipment damage.
Wire / Cable Routing
The TWSD16128PHC-UL comes with pre-installed cable routing tie downs. These tie downs
are used to provide convenient cable routing. It is important to use these cable tie downs to
ensure that the installed cables are kept away from the other components within the
enclosure. Refer to figure 4 below to illustrate the use of these tie downs.
Drain hole on bottom of enclosure.
Do not mount anything on the bottom of
the enclosure.