Brother DCP-8085DN - Manual (Page 28)

Chapter 2
14
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: thin paper, plain paper, thick paper,
bond paper, recycled paper, transparencies,
labels or envelopes.
For best results, follow the instructions below:
„ Use paper made for plain paper copying.
„ Use paper that is 16 to 28 lb (60 to
105 g/m
2
).
„ Use labels and transparencies which are
designed for use in laser machines.
„ DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
„ For proper printing, you must choose the
same paper size from your software
application as the paper in the tray.
„ Avoid touching the printed surface of the
paper immediately after printing.
„ When you use transparencies remove
each sheet immediately to prevent
smudging or paper jams.
„ Use long grain paper with a neutral Ph
value, and a moisture content of approx.
5%.
Recommended paper and
print media
2
To get the best print quality, we suggest using
the following paper.
Paper Type Item
Plain Paper Xerox 4200DP 20 lb
Hammermill Laser Print
(24 lb=90 g/m
2
)
Recycled Paper No specific brand
recommended
Transparency 3M CG3300
Labels Avery laser labels white
#5160
Envelope No specific brand
recommended