Unisteer 8011570 Ford Fairlane Rack 1963-1965 - Manual (Page 8)

Page 8 656250
15. Next tighten up the pinch bolts to 40 ft lbs. making sure nothing is binding or rubbing when turning.
Pay close attention to the driver side mounting bracket to make sure the joint or shaft is not rubbing
the bracket or the bolt.
16. Last we need to install the pump. The bracket and pump were shipped assembled you need to
remove your old pump and bracket assembly if equipped. Install the main mount bracket and pump in
place using the 2 standoffs and longer 5/16” bolts. You must remove the 2 water pump/ timing cover
bolts and install the bracket and standoffs in their place with the longer bolts.