UVP Lab Table - Manual (Page 2)

Assembly Instructions
It is essential that the screws are not tightened until all screws are inserted into their proper place. Once all screws
are loosely in place, stand the Lab Table upright and tighten the screws.
1. Attach Vertical Legs A, F, G, and E to Middle Shelf D using the long, black 3/8 screws and nuts.
2. Attach Vertical Legs A, F, G, and E to Top Shelf B using the non-black 3/8 screws and nuts.
3. Attach Vertical Legs A, F, G, and E to Bottom Shelf C using the non-black 3/8 screws and nuts.
Schematic
Corporate Headquarters: UVP, LLC
2066 W. 11th Street Upland, CA 91786 / Tel: (800) 452-6788
(909) 946-3197 / Fax: (909) 946-3597
European Operations: Ultra-Violet Products Ltd
Unit 1, Trinity Hall Farm Estate, Nuffield Road,
Cambridge CB4 1TG UK / Tel: +44(0)1223 420022
Fax: +44(0)1223 420156
For additional information on UVP’s products, go to www.UVP.com
A
C
B
D
D
E
F
G