Vigo VG06012 - Manual (Page 7)

1
2
HEX SCREWS
TWO HEX SCREWS
FIG.6
4
14
17
1. Install the wall connector (#1)
approximately two-thirds for the wall.
[SEE FIG.6]
2. Install the structural arm (#2) to the
wall connector.
3. Mark a hole on the wall for the
mounting screw.
4. Move the wall connector aside. Drill
hole into the wall and place a plastic
anchor (#17) into the hole.
5. Move the wall connector back into
place. Screw into wall with 1 1/8"
screws (#14).
6. Tighten all hex screws.
C. INSTALLING THE HANDLE
Assemble the door handles (#12) to the door (#3). [SEE FIG.5]
DOOR PANEL
OUTSIDE HANDLE
INSIDE HANDLE
SCREW
METAL WASHER
CLEAR WASHER
WHITE TUBE
GLASS SUPPORT
7
FIG.5
GLASS SUPPORT (7)
GASKET
SIDE GLASS PANEL
HEX SCREW
VIEW FROM THE TOP
WALL
FIG.4
HEX SCREW (15)
MODEL VG06012
METAL WASHER
D. INSTALLING THE SIDE PANEL SUPPORT
THREADED SCREW