Vigo VG06012 User Manual
Page 9
VIEW FROM INSIDE OF THE CABIN
THIN GASKETS
HEX SCREWS
PLATE
FIG.8
FIG.9
15
F.
INSTALLING THE HINGE
1.
Clean the glass surface where the hinges (#8) are to be installed with rubbing alcohol.
2.
Screw the metal plate to the hinge with a washer on each side of the panel using the hex key
(supplied). [SEE FIG.8]
G.
INSTALLING THE DOOR
WARNING
!
DOOR PANEL INSTALLATION REQUIRES TWO OR MORE PEOPLE TO ASSIST
1.
Position the door (#3) onto the hinges.
2.
Place the door on the bottom rail (#9).
3.
Align the door correctly using a level. Verify that the top of the door aligns with the top of the side
glass panel (#4).
4.
Mark four (4) holes on the wall for the mounting screws for each hinge.
5.
Remove the door and drill holes into the wall where marked. Place plastic anchors (#18) inside
the holes.
6.
Replace and screw the door securely to the wall with 1 5/8" screws (#15). [SEE FIG.9]
9
MODEL VG06012