Vortex Optics ESCAPE MONOPOD User Manual
Page 2
©Vortex Optics USA 2009
K
J
M
L
1.
2.
Adjusting the height
The Escape monopod has five leg sections with padding on the upper section. To adjust the
height, release the flip-lever locks (J) and slide leg sections out to the desired
length. Press the flip-lever back down to lock a section in place.
Warranty and Service
This product is warranted to be
free of defects in materials and
workmanship for three years after
purchase. Vortex Optics will repair
or replace such product or part
thereof that, upon our inspection, is
found to be defective in materials or
workmanship.
If you need assistance using your
tripod, please contact:
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
800-426-0048
Using the gun rest
The Escape monopod also comes with a gun rest (K)
that attaches to the quick release plate in the same way
you would attach a spotting scope, binocular, or camera.
There’s very little maintenance you’ll ever have to do on
your Escape Monopod.
Maintenance
L
1. If the monopod platform connection (L) becomes
loose, remove the ball head.
2. Loosen the three set screws (M), then turn the
ball head counter-clockwise.
3. Re-connect the assembly by turning the ball head
clockwise until secure, then tighten the set screws.
Note:
To adjust tension on the leg lock, release the
flip-lever lock and tighten the lever screw
with an Allen wrench.
Wrench included.