Waring Pro WTO450 User Manual

Page 9

Advertising
background image

9

the pan under the rack to fit into the metal brackets on

the sides.

Always leave door ajar when broiling.

Note: Never use glass oven dishes to broil.
Option: To reduce the chance of sizzling or spattering, you can

add approximately ¼ cup water to the bottom of the

baking pan.

Step 5. To stop broil function, turn Function and Timer/Toast

Shade controls to OFF, and turn Temperature control to

MIN.

Note: When broiling thicker items, it is recommended to use

just the baking pan in position C, without the rack.

To Use the Toast Function
No preheating is necessary for toast function.
Step 1. To toast, make sure the oven rack is in the rack position

A, as indicated in the diagram on page 8. If toasting

two items, position them in the middle of the rack. Four

items should be evenly spaced – two in front, two in

back. Close the glass door.

Step 2. Toast/Shade Selection

Set Function control to Toast. Set Turn Timer/Toast

Shade control to desired Toast/Shade setting. The

power indicator light will turn on.

Step 3. Set temperature control to 450˚/Broil/Toast.
Step 4. Turn the timer past the 20-minute mark then back to

desired toast time anywhere between the toast symbols

from light to dark for your preferred toast shade.

NOTE: Consecutive multiple cycles with the Toast

Shade control set to Dark may result in the shade of the

toast being darker than desired. After the first cycle, we

recommend toasting at a lighter setting.

Step 5. When toasting is finished, the oven bell will sound and

turn off. Turn Function control to OFF, turn Timer Toast

Shade control to OFF.

Step 6. Open door completely and remove food.

To Stop Toasting
If you wish to stop the toasting cycle before it is finished, turn

Timer/Shade control to OFF. This will cancel the toast cycle.

Advertising