Waring Pro CRS50 - Manual (Page 5)

4
OPERATING INSTRUCTIONS
Connection and Use
This appliance is for 120 volts only and should not be used with a
converter.
We recommend that you charge your electric wine opener for at
least twelve hours before using for the first time. Please follow the
instructions for charging as stated below:
Charging Your Electric Wine Opener
Plug one end of the power adapter into the back of the charging
base and the other end into an electrical outlet. Place the electric
wine opener into the charging base, making sure that it is firmly in
position and that it is fully engaged with the charging connection.
The blue indicator light will illuminate. It will take approximately 12
hours to charge your electric wine opener. The charging light will
remain blue during the charging process, even when fully charged.
Your wine opener can open approximately 50 bottles of wine on a
full charge.
Foil Cutter
For your convenience, this unit has a foil
cutter, which can be stored in the base
of the unit. Before removing the cork, you
must remove foil to expose top part of cork
surface (see fig 1). Attach foil cutter to the
top of the wine bottle. Keep hand on lower
part of bottle and turn foil cutter in twisting
motion to remove foil. Remove foil to expose top part of cork surface.
CAUTION: Blade on foil cutter is sharp. Please keep fingers away
from cutter's sharp edges.
(fig. 1)