Waring Pro CRS50 - Manual (Page 6)

5
To Operate Your Wine Opener
Press the REMOVE switch to remove the cork
from the bottle. After the cork has been
removed from the bottle, press the EJECT
switch to release the cork from the wine
opener (see fig. 2).
1. Place the wine opener on top of the wine bottle, making sure
that it remains as straight/upright as possible at all times. If you
hold the electric wine opener at an angle to the bottle it will not
remove the cork properly.
2. Hold the wine opener and bottle firmly.
Press the REMOVE switch. The
corkscrew spiral will turn in a
counterclockwise direction and enter
the cork, gradually removing it from
the bottle. When the mechanism
stops, the cork has been fully
removed from the bottle (see fig. 3).
3. Lift the wine opener up and away from
the bottle. To eject the cork, press the
EJECT switch. The spiral will turn in
a clockwise direction and release the
cork from the wine opener (see fig. 4).
4. Always return the wine opener to the charging base when
done. This will protect the unit while not in use.
(fig. 4)
(fig. 3)
(fig. 2)