Weidmuller WAVE Analog 2 OLP - Manual (Page 4)

9
3. Mounting
Die The analogue signal isolators are mounted on standard TS 35 rails.
4. Electrical connection
Warning! For applications with high isolation voltages, take measures to
prevent accidental contact and make sure that there is suffi-
cient distance or insulation between adjacent devices!
Terminal assignments
1 Input current loop +
2 Not assigned
3 Input current loop –
4 Not assigned
5 Not assigned
6 Not assigned
7 Output 1 current loop +
8 Not assigned
9 Output 1 current loop -
10 Output 2 current loop +
11 Not assigned
12 Output 2 current loop -
Wire cross-section max. 2.5 mm 2
Multi-wire conncection max. 1 mm 2
(two wires with same cross-section)
7 8
10
1 2 3
9
11 12
4 5 6