Weidmuller PT 100/3 sig conditioners for voltage output - Manual (Page 10)

16
3.3 Setting the potentiometer (depending on model)
(v. Fig. 3)
The module has been exactly calibrated by the manufacturer.
Should nevertheless a follow-up adjustment be necessary, open
the hinged cover upwards.
The potentiometers are on the front panel.
3.4 Pluggable cross-connections for voltage supply
(v. Fig. 4)
A maximum feed through of 2 A is possible.
If a signal conditioner is accidently rotated through 180
°
, the
cross-connection cannot be inserted.
3.5 Labelling possibilities
(v. Fig. 5)
WS 10 connector markers can be used to label module.