Physical description, Power/activity led, Usb 3.0 interface – Western Digital My Passport Enterprise User Manual User Manual
Page 6: Registering your drive, Handling precautions
MY PASSPORT ENTERPRISE
USER MANUAL
ABOUT YOUR WD DRIVE
– 3
Physical Description
As shown in Figure 2, the My Passport Enterprise drive has:
• A power/activity LED indicator
• A USB 3.0 interface port
Power/Activity LED
The power/activity LED shows the drive’s power state as follows:
USB 3.0 Interface
USB 3.0 supports data transfer rates up to 5 Gb/s. USB 3.0 is backward compatible with
USB 2.0. Connection to a USB 2.0 port transfers data at the port speed—up to 12 Mb/s.
Registering Your Drive
Always register your My Passport Enterprise drive to get the latest updates and special
offers. You can easily register your drive online at
Handling Precautions
WD products are precision instruments and must be handled with care during unpacking
and installation. Rough handling, shock, or vibration can damage drives. Always observe
the following precautions when unpacking and installing your external storage product:
• Do not drop or jolt the drive.
• Do not move the drive during activity.
Figure 2. My Passport Enterprise Drive
LED Appearance
Power State/Activity
On steady
Idle
Fast flashing, approximately 3 times per second
Activity
Slow flashing, approximately every 2.5 seconds
System standby
Power/Activity LED
USB 3.0 Interface Port