Western Digital WD TV Live/Live Plus Media Player User Manual - Manual (Page 145)

WD TV Live/Live Plus HD Media Players
User Manual
SETTINGS AND ADVANCED FEATURES – 141
Update Device
Use this menu to check for the latest WD TV media player firmware version available
online. If a new firmware version is available, you can download it automatically and
upgrade the WD TV media player without using a USB device.
To perform a device update:
1. Press / to select Update Device, then press ENTER. The screen displays
the current firmware version.
2. Press to select OK on the system reset prompt, and then press ENTER.
3. Press ENTER to begin checking for a newer version of the software.
4. If the latest version of the firmware online is older than or similar to the current
version of the firmware in the media player, the following screen appears. Select
OK, then press ENTER to return to the Update Device screen. Press BACK to
return to the System Settings screen.
If the latest version of the firmware online is newer than the current version of the
firmware in the media player, the following screen appears. Select OK, then
press ENTER to restart the system and perform a firmware upgrade. See
“System Firmware Upgrade” on page 145 for further details on completing the
firmware upgrade.
System Information
View the System Information screen to view network-related settings currently used
by the media player.
System Registration
To register your WD product using the System Setting menu:
1. Make sure your media player has an active network connection.
Go to “Network Setup” on page 23 for instructions on how to set up a network
connection.
2. Navigate to the Home | Settings menu bar.
3. Press / to select System Setting , then press ENTER.
4. Press / to select System registration, then press ENTER.