Western Digital WD TV Live/Live Plus Media Player User Manual - Manual (Page 20)

WD TV Live/Live Plus HD Media Players
User Manual
GETTING STARTED – 16
Component Video and Audio (High Definition)
The component connection only provides video signals. You will also need to
connect the composite audio cables to provide sound. This interface provides video
quality resolution of up to 1080i.
To connect your media player using a component-to-mini cable:
1. Plug mini cable into the component connector on the media player.
2. Plug the opposite ends into the component ports on your TV or audio/video
system (if available), red to red, green to green, and blue to blue.
3. For audio, plug the composite-to-mini connector into the composite port on the
media player.
4. Plug the audio connectors on the opposite end of the cable into the composite
audio input ports on your TV, red to red and white to white.
Wait a few seconds for your TV to detect the media player. If the media player is
not detected, you may need to change the input source on your TV to
component or composite, depending on your connection. Check the user
documentation of your TV for more information.
Once the media player is detected, the splash screen displays to indicate system
bootup, then the home screen of the user interface opens.