Western Digital My Passport Studio User Manual - Manual (Page 61)

MY PASSPORT STUDIO
USER MANUAL
TROUBLESHOOTING – 56
Troubleshooting
1
9
If you have problems installing or using this product, refer to this troubleshooting section
or visit our support Web site at
support.wdc.com and search our knowledge base for
more help.
This chapter includes the following topics:
Installing, Partitioning, and Formatting the Drive
Frequently Asked Questions
Installing, Partitioning, and Formatting the Drive
*The FAT32 file system has a maximum individual file size of 4 GB and cannot create partitions larger than 32 GB in Windows.
However, Windows users can overcome these file size limitations by formatting the drive to NTFS using the Disk Management
utility. See answer ID 1287 at
support.wdc.com and article IDs 314463 and 184006 at support.microsoft.com for further details.
To create partitions larger than 32 GB in FAT32 when reformatting the drive, download the External USB/FireWire FAT32 For-
matting Utility from
support.wdc.com/download .
Frequently Asked Questions
Q: Why does the drive not power up?
A: Be sure the drive is plugged in to a power source. A special cable might be needed for computers with
limited bus power. For more information in the U.S., visit our Web site at
store.westerndigital.com .
Outside the U.S., contact WD Technical Support in your region.
Q: Why is the drive not recognized under My Computer or on the computer desktop?
A: If your system has a USB 2.0 PCI adapter card, be sure that its drivers are installed before connecting
your WD USB 2.0 external storage product. The drive is not recognized correctly unless USB 2.0 root
hub and host controller drivers are installed. Contact the adapter card manufacturer for installation
procedures.
Q: Why won't my computer boot when I connect my USB drive to the computer before booting?
A: Depending on your system configuration, your computer may attempt to boot from your WD portable
USB drive. Refer to your system’s motherboard BIOS setting documentation to disable this feature or
visit
support.wdc.com and see Knowledge Base answer ID 1201. For more information about booting
from external drives, refer to your system documentation or contact your system manufacturer.
Q: Why is the data transfer rate slow?
A: Your system may be operating at USB 1.1 speeds due to an incorrect driver installation of the USB 2.0
adapter card or a system that does not support USB 2.0.
Q: How do I determine whether or not my system supports USB 2.0?
A: Refer to your USB card documentation or contact your USB card manufacturer.
Note: If your USB 2.0 controller is built in to the system motherboard, be sure to install the
appropriate chipset support for your motherboard. Refer to your motherboard or
system manual for more information.
Q: What happens when a USB 2.0 device is plugged into a USB 1.1 port or hub?
A: USB 2.0 is backward-compatible with USB 1.1. When connected to a USB 1.1 port or hub, a USB 2.0
device operates at the USB 1.1 full speed of up to 12 Mbps.
If your system includes a PCI slot, you can achieve Hi-Speed USB transfer rates by installing a USB 2.0
PCI adapter card. Contact the card manufacturer for installation procedures and more information.
How to Answer ID
„ Install, partition, and format the drive in Windows XP and Vista 207, 3322
„ Install, partition, and format the drive to Mac OS X 10.4.11 and 10.5+ 287, 3323
„ Reformat from Mac GPT to Windows XP NTFS 3645
„ Reformat the drive from Mac GPT to Windows Vista NTFS format 3647
„ Obtain and reinstall the original software included with this product 1425
„ Format the drive to the FAT32 file system* 1364
„ Use the drive on a Mac and a PC simultaneously 291