Western Digital My Net AC Bridge User Manual - Manual (Page 23)

ADVANCED SETTINGS
20 MY NET AC WI-FI BRIDGE
USER MANUAL
2. To change from Dynamic IP (DHCP), the default setting, to Static IP, select Static IP
from the LAN Connection Type drop-down list. The screen displays additional
settings.
3. Review and complete the settings:
4. Click Save.
Setting Description
LAN IP address IP address of the bridge. The IP address should
be on the same network as your existing router.
Subnet Mask The subnet mask is used to control how many
subnetworks can exist in your local network.
Default Gateway IP address of the router to which this device is
connected wirelessly.
Primary/Secondary DNS Server Your ISP configures and maintains the primary
and secondary DNS Server addresses. You can
find them on your main router or by contacting
your ISP.