Western Digital My Net AC Bridge User Manual User Manual
Page 27
Advertising
ADVANCED SETTINGS
24
MY NET AC WI-FI BRIDGE
USER MANUAL
Using the Dashboard
1. On the Admin screen, click the System tab on the left to display the Admin / System
screen:
2. Click Reset to the right of Reset to Factory Default Settings.
3. When a confirmation message displays, click OK.
4. Wait until the Wi-Fi bridge reboots before using it.
Using the Reset button
To reset the Wi-Fi bridge manually:
1. Press and hold the Reset button on the bottom of the Wi-Fi bridge for at least 8
seconds.
When the reset finishes, the Power LED blinks.
2. Wait until the reset finishes before using the Wi-Fi bridge.
Advertising