Wolo EE100 Electronic Industrial Horn - Manual (Page 2)

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
LIMITED TO A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO
PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER
ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of
purchase. Provide with the return a brief description of the problem. Also, include with the return a check or money
order in the amount of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street
Deer Park, NY 11729
E-mail: [email protected]
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date
of purchase, that this product is free from defects in workmanship and materials. If there is such a proven
defect, Wolo, at its option, will either repair or replace the item free of charge, if it is returned to Wolo within
three months from the date of purchase together with proof of purchase as described below. Wolo reserves the
right to inspect any defect prior to settling any warranty claim by repair or replacement. This warranty is limited
as above provided and Wolo will not be responsible for fire or other casualty or accident, due to neglect,
abuse, abnormal use, modifications, faulty installation of this product, or natural causes.
© 2008 Wolo Mfg. Corp All Rights Reserved.
11. Connect the plug to the EE100. The horn installation is complete and the horn is ready to be used.
INSTALLATION USING A NEW HORN BUTTON SWITCH FIG. #4
12. The RED WIRE of the power plug provided
is connected to a (+) positive power source
such as; battery, alternator, fuse block and
etc. Use 16-gauge or heavier wire.
IMPORTANT: Always make sure that there is
a 3-amp inline fuse used in the horn circuit to
protect the vehicle, (fuse not included).
13. The BLACK WIRE of the power plug
provided is connect to the horn switch,
(switch not included).
14. Connect the horn switch’s other terminal to ground, any metal body surface that is clean of paint and rust.
15. Connect the plug to the EE100. Make sure all connections are taped and secured. The horn installation is
complete and the horn is ready to be used.