Wood’s Powr-Grip PCFT2SA47 - Manual (Page 9)

Rev 0.0/11-13 7 P2-DC2: #35114
A3
ASSEMBLY
1) Open the shipping containers and remove all devices for restraining or protecting the lift
frame and pad channels of the vacuum lifter. Save the containers and devices for use
whenever the lifter is transported.
2) Suspend the lift frame from a crane as follows: Select hoisting equipment (crane and hoist,
when applicable) rated to carry the Maximum Load Capacity plus the Lifter Weight (see
SPECIFICATIONS).
Note: Any application of the lifter must conform to all statutory or regulatory standards that
relate to the hoisting equipment when used in its geographical location.
Disengage the rotation latch and raise the lift frame to a vertical orientation (see figure A2).
Attach the hoisting equipment hook to the
lift spool (see figure A3).
Make sure hoisting equipment
hook is fitted with restraining
latch to prevent lift spool from
slipping off under any
circumstances.
Note: Make sure the hook will not interfere
with the load, using a sling or other rigging
as necessary.
Only use slings rated to carry
Maximum Load Capacity plus
Lifter Weight.
A2