Specifications – Wood’s Powr-Grip MT1TL6FAIR User Manual
Page 3
Rev 6.0/12-12
1
MT1-AIR: #35080
SPECIFICATIONS
Model Number:
MT1TL6FAIR
Description:
Designed for use with a crane or other hoisting equipment, the
MT1TL6FAIR lifter employs vacuum to hold a load for lifting, and
it provides manual 90° tilt movement for load manipulation.
Power Source:
Compressed air, 80-150 psi [550-1035 kPa] line pressure, 2 SCFM
[57 liters/minute] @ 80 psi [550 kPa]
Vacuum Pad / Pad Spread: One 6" [15 cm] nominal diameter, concave (Model TL6F),
standard rubber, with #60 filter screen
Maximum Load Capacity: 50 lbs [25 kg] rated at 16" Hg [-54 kPa] on clean, smooth,
nonporous flat surfaces
1
Lifter Weight:
3.25 lbs [1.47 kg]
Vacuum System Weight:
2.15 lbs [0.96 kg]
Tilt Capability:
Manual, 90°
Vacuum Pump:
Venturi type, 1 SCFM [28 liters/minute] nominal vacuum flow @
80 psi [550 kPa]
Vacuum Reserve:
Vacuum reserve system helps prevent immediate vacuum loss in
case of power failure.
Vacuum Gauge:
Dial gauge indicates current vacuum level in positive inches of Hg
and negative kPa.
Operating Elevation:
Maximum = 13,000 feet [3962 meters]
Operating Temperatures: 0° to 120° F [-18° to 49° C]
Service Life:
This lifter is designed to have a service life of at least 20,000
lifting cycles, when used and maintained as intended. Vacuum
pads, filter elements and other wear-out items are excluded (see
MAINTENANCE and REPLACEMENT PARTS LIST for more
information). For the D
ISPOSAL OF THE
L
IFTER
after its service life,
see INTENDED USE.
ASME Standard BTH-1:
Design Category "B", Service Class "0" (see www.powrgrip.com
for more information)
!!-CE-!! Note: This symbol appears in the
INSTRUCTIONS
manual only when requirements of a CE Standard are
different
from requirements of other standards that also apply to this vacuum lifter. CE requirements are mandatory
in geographical areas where CE Standards apply, but may be optional in other locations.
1
Load Capacity is based on a friction coefficient of 1; see MAINTENANCE: V
ACUUM
P
AD
M
AINTENANCE
: Friction Coefficient for
additional information.