WORX WU654 400W vibrafree Rotary Sander 150mm 240V - Manual (Page 10)

10
take care that the latching lever engages. Then connect the hose of
a vacuum cleaner. First please turn on the vacuum cleaner, and then
turn on the sander. If you stop sanding, first turn off the sander, then
turn off your vacuum cleaner.
OPERATING THE SWITCH (See Fig. F)
a) ON /OFF SWITCH
Depress to start and release to stop your tool.
b) SWITCH LOCK-ON BUTTON (See Fig. F)
Depress on/off switch
(2) then lock-on button (3) , release on/off
switch first and lock-on button second. Your switch is now locked
on for continuous use. To switch off your sander just depress and
release the on/off switch.
VARIABLE SPEED CONTROL (See Fig. G)
The unit is equipped with a variable speed control. This allows you to
adjust the speed in order to achieve different finishes.
Material
Grain Rough
sanding/Fine
sanding
Variable
speed
control
Sanding
plate
Paint roughing
Paint touch-up
Paint removial 180/400
120/240
40/80
3
5
4 Medium
Hard
Medium
4
5
1
G F
H