WORX WU654 400W vibrafree Rotary Sander 150mm 240V - Manual (Page 8)

8
1
Operation instructions
Note: Before using the tool, read the instruction book carefully.
INTENDED USE
The machine is intended for dry sanding of wood, plastic, metal and
filler material as well as painted surfaces. Machines with electronic
control are also suitable for polishing.
KNOW YOUR RANDOM ORBIT SANDER
vibrafree™ Random Orbit Sander are uniquely designed with
two counter balanced sanding pads that always move in opposite
directions to each other. This design platform virtually cancels out
the sander’s vibration in every load condition. This active vibration
canceling technology makes this sander more comfortable and
easy to use, taking the vibration out of the sander, the workpiece,
your hands and arms, and putting this energy to work sanding and
removing material.
FITTING THE SANDING PAPER (See Fig. A,B)
Sanding paper is easily attached on the pad of your sander. Fit the
inner spot paper over the plate so that it covers the entire area, push
and slightly twist to make sure the coated sanding paper is even on
the plate. Operate like this when fit the outer ring paper. Make sure
1 2 3 4 5
6 7 10
8
9
11b
11a
12
B A
D.2
D.1 C
E